Scootr Scooters - Products
PHONE: 256-468-2761
Search Products
 

Home » Rockville Gas Scooter Parts

 
Drive Shaft 5m- 20 tooth Hardened Metal Belt Gear for scooter

Details 

Scooter gear Hardened 20 tooth Metal 5M Belt Gear Same size as factory small metal belt gear on transmission. This is the factory small metal gear for "the rock", this is the recommended belt gear for shaft as it is Hardened and wears slowly. Replace your worn out sprocket today and break less belts.
List Price: $54.95
Price: $46.00

Drive Shaft Bearing #6201

Details 

Drive Shaft Bearing #6201 SALE $8.60 each
List Price: $14.50
Price: $8.60

Drive Shaft For Raser ScootR Libra T.H.S Rockfield

Details 

Drive Shaft made per order fits ScootR, Salorr, Staru, R3, Tiger, Rockfield, Libra T.H.S. & chuweng & Raser, FX. R1, R3, R4, R5 Use correct "pulley spacer" intended for use with one or two left side bearings between left side shaft pulley and bearing s? to avoid major shaft damage. Call scooterman @ 256.468.2761 & inspect frame to determine correct application of one or two left side bearings.
List Price: $89.95
Price: $199.00

Drive Shaft Left Sprocket 4mm "Keybar"

Details 

Drive Shaft Big Sprocket 4mm "Keybar" keeps lower left side bigger pulley from spinning on shaft
List Price: $4.00
Price: $3.00

 

Details 

Stainless Steel Driveshaft Nut
List Price: $2.95
Price: $2.25

Drive Shaft Spacer Type 3 Custom For Lower Left 5m Belt Sprocket & shaft bearing

Details 

Drive Shaft Spacer Type 3 Custom For Lower Left 5m Belt Shaft Sprocket when using 2 left side shaft bearings only! Some models/frames only benefit from extra left side bearing when primary bearing fails or shaft is worn where bearing rides.most models can carry 2 left bearings. call if need be. Fits many scooters if driveshaft bearing dwell in frame is exact same size for entire bore & is for custom improved application or temp fix only! not stock! This spacer goes outside or between lower left side drive shaft bearings x 2! If between two left bearings on Cobra you may need a washer or change pulley to our solid metal lower left pulley. This is for custom application only. Call before ordering! This spacer is only used when installing 2 left side bearings for which some frames don't retain the 2nd left side bearing. Call and we will explain. (256)468-2761 This is an improved spacer that is made in usa. Specs:ID-480/1000ths, OD-750/1000ths, 340-350 thousandths long.
List Price: $13.00
Price: $9.99

Drive Shaft Spacer Type 4 Custom For Lower Left 5m Belt Shaft Sprocket when

Details 

Drive Shaft Spacer Type 4 Custom For Lower Left 5m Belt Shaft Sprocket when using 2 left side shaft bearings only! Some models/frames only benefit from extra left side bearing when primary bearing fails. most models can carry 2 left bearings. call if need be. Fits many scooters if driveshaft bearing dwellin frame is exact same size for entire bore & is for custom improved application only! not stock! This spacer goes between lower left side pulley and left side drive shaft bearings x 2! Or between two left bearings on Cobra. This is for custom application only. Call before ordering! This spacer is only used when installing 2 left side bearings for which some frames don't retain the 2nd left side bearing. Call and we will explain. 256.468.2761 This is an improved spacer that is made in usa. Specs:ID-480/1000ths, OD-750/1000ths, 400 thousandths long. use of type 3 spacer for this extra bearing setup is more common.
List Price: $13.00
Price: $10.00

Drive Shaft Spacer Type 5 goes Between Right Bearing & small gear

Details 

Driveshaft Spacer Type 5 goes Between Right Bearing & small gear to keep sprocket from walking or rubbing inside of frame. Specs-ID-600/1000ths OD-800/1000ths & is 200/1000ths wide. need for such a spacer to be determined by purchaser by measuring distance between edge of installed gear & right side bearing. not all shafts need such a spacer as some have gear snap ring like Cobra or can be welded. not for use with chain drive kits.
List Price: $11.00
Price: $9.00

Drive Shaft Spacer Type 6 goes Between Right Bearing & small gear

Details 

Driveshaft Spacer Type 6 goes Between Right Bearing & small gear to keep sprocket from walking or rubbing inside of frame. Specs-ID-600/1000ths OD-800/1000ths & is 120/1000ths wide. need for such a spacer to be determined by purchaser by measuring distance between edge of installed gear & right side bearing. not all shafts need such a spacer as some have gear snap ring like Cobra or can be welded. not for use with chain drive kits.
List Price: $11.00
Price: $9.00

Engine Cover Black Plastic e-ton 40 p/n 700151

Details 

ETON 40/41.5cc plastic engine cover P/N 700151
List Price: $37.95
Price: $29.00

Engine Long Block only ETON IXL 40, RXL 40, 2.2H.P/41.5cc

Details 

Engine crankcase and crankshaft with cylinder head and piston and spark plug & exhaust studs or bolts & gasket & intake gasket only. does not include carburetor, starter recoil or catch/ratchet or clutch shoes or flywheel or ignition coils,engine covers, external engine parts sold separately.
List Price: $329.00
Price: $283.00

Engine Lower End Rebuild Kit

Details 

1 x crankcase gasket 2 x crankshaft bearings 2 x crankshaft seals
List Price: $37.60
Price: $31.95

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »


Home - Products - Search - Checkout

© Copyright by ScootR 
Website Designed by Website Interactive