Scootr Scooters - Products
PHONE: 256-468-2761
Search Products
 

Home » General Scooter Parts for Gas & Electric models

 
 

Details 

#35 Chain Stainless Steel 22inch with Master Link For Nuke, Lowrider Rock, StandR Only!!!
List Price: $73.95
Price: $64.95

 

Details 

#35 Chain Stainless Steel 35inch With Master Link
List Price: $97.00
Price: $84.95

 

Details 

#35 Chain Stainless Steel 47inch With Master Link
List Price: $129.00
Price: $104.95

 

Details 

#35 Chain Stainless Steel Master Link
List Price: $6.70
Price: $5.75

#35 Shaft Sprocket 12 tooth p/n 2500T141

Details 

#35 Shaft Sprocket 12 Tooth Hardened Fits 9 & 10 inch rear tire models With sprocket up inside box frame
List Price: $67.95
Price: $60.00

#35 Shaft Sprocket 13 tooth p/n 2500T151

Details 

#35 Shaft Sprocket 13 Tooth Hardened Fits 9 & 10 inch rear tire models With sprocket up inside frame
List Price: $69.00
Price: $60.00
Out of Stock

#35 Sprocket For Wheel 36 tooth p/n2299k317

Details 

#35 Sprocket For Wheel 36 tooth Reccomended for use with 12 tooth shaft sprocket on 9 inch rear tire models only to retain factory gear ratio on The Rock, Cobra, Lowrider Rock, Nuke & StandR
List Price: $64.95
Price: $60.00

 

Details 

#35 Sprocket For Wheel 40 Tooth Hardened Recommended for use with 13 tooth shaft sprocket to keep 3 to one factory gear ratio on Cobra, The Rock, Nuke, Lowrider Rock & StandR This sprocket will increase speed on all other models using 4 to 1 gear ratios, such as SCOOTR, Raser or or Rockville or Libra or StarII or Salorr with 9 inch rear tire. But is not recommended with 3.0-4/280x65 rear tires unless you don't care about hill pulling ability or potentially straining your clutch. Recommended wheel sprockets for 10 inch rear tires would be 45 tooth only. "Big wheel" models use 60 tooth wheel sprockets.
List Price: $64.95
Price: $60.00

#35 Sprocket For Wheel On Big Wheel 52 tooth

Details 

#35 Sprocket For Wheel On Big Wheel models 52 tooth. can be used on 10 inch tire for torque or big wheel model for speed. This is the Cobra Extreme or Rocky factory wheel sprocket. This is for speed. for factory ratios on Raser big wheel order 60 tooth.
List Price: $107.00
Price: $69.00

#35 Sprocket For Wheel On Big Wheel Scooters 60 tooth p/n 2299k321

Details 

#35 Sprocket For Big Wheel. 60 tooth hardened sprocket p/n 2299k321
List Price: $99.95
Price: $79.00
Out of Stock

 

Details 

#77 Jet 40cc New Style ATV Float Carbs Only The factory jet in the New ATV style carburetor for 40cc E-ton Rascal & Viper Jr and some older Cobra & Chuweng scooters is #64 which is believed to be insufficient and lean which could create excessive heat and piston ring collapse or premature upper engine failure. Recommend is this number 77 jet to make sure there is plenty of fuel available and optimal running temperatures.
List Price: $6.99
Price: $5.00

1000-5M-15 is the WRONG BELT. reccomend using 1000-5m-18 instead

Details 

This belt will fit our "Big Wheel" Scooters, BUT!! (It is weak) compared to the 5m-18 factory belt. We have even found that slight Shimming to Xcooter Thunder a.k.a. Raser Big Wheel a.k.a. PanthR models that have 102 tooth aluminum wheel sprockets with lip out can be shimmed behind sprocket to allow for running even 5m-20 belts. Not sure about Salorr Big Wheel model using 5m-20 yet without fipping both sprockets and maybe replacing wheel sprocket from plastic to aluminum 102 tooth sprocket from Chuweng.
List Price: $37.68
Price: $31.95
Out of Stock

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »


Home - Products - Search - Checkout

© Copyright by ScootR 
Website Designed by Website Interactive