Scootr Scooters - Products
PHONE: 256-468-2761
Search Products
 

Home » Salorr Gas Scooter Parts

 
3.0-4.0 Tire By Kenda Street Gripper 154-104

Details 

3.0-4.0Tire By Kenda Street Gripper P/n 154-104
List Price: $33.59
Price: $27.95

3.0-4.0 Tire Kenda street slick Xtr 154-89

Details 

3.0-4.0 Tire By Kenda Super Smoothe street slick Xtr 154-89
List Price: $32.00
Price: $24.60

4.10/3.50-4 Inner Tube

Details 

4.10/3.50-4 Inner Tube
List Price: $11.00
Price: $8.50

4in Alloy Front Wheel For Cobra Nuke Rock and many others

Details 

4in Alloy front Wheel For Cobra Nuke Rock and many others. Color of inset is Black. Also see part listing of front or rear wheel to see image of kit contents. NOTE: Neither valve cap or tubes, tires or brakes are NOT included, but ALL else is!
List Price: $98.50
Price: $84.00

560-5m-15 Belt is SHORTER clutch to shaft drive Belt

Details 

560-5m-15 Belt For use as clutch belt when 575 clutch belt is still loose even with motor/engine adjusted all the way back. If motor mounts are weak and dry rotted, replace them first to eliminate that being the source of a belt tension and adjustment issue.
List Price: $27.95
Price: $22.99

575-5m-15 Belt is "most common" CLUTCH BELT

Details 

575-5m-15 CLUTCH BELT most common on e-ton powered scooters. 500 & 560 & 580 & 600 & 635 available
List Price: $19.00
Price: $13.00

580-5m-15 Belt

Details 

580-5M-15 Belt Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with 20 tooth trans sprocket to later find it became too long over time...unless your scooter has a 24 tooth trans sprocket. Reccomend superceding to 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.
List Price: $27.00
Price: $23.00

 

Details 

585-5M-15 Belt for use with 24 tooth clutch sprockets Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with a 24 tooth trans sprocket. Reccomend 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.
List Price: $26.95
Price: $23.00

60 Tooth Black Plastic Sprocket

Details 

60 Tooth Black Plastic Sprocket
List Price: $18.99
Price: $10.99

60 Tooth Lower Left Shaft Plastic Sprocket With Steel Hub

Details 

60 Tooth Lower Left Shaft Plastic Sprocket With Steel Hub
List Price: $43.95
Price: $39.95

60 Tooth Shaft Sprocket 5m Alloy for Left Belt

Details 

Shaft Sprocket 5m chromed Alloy for Left side belt, lower pulley or driveshaft big alloy sprocket. 60 tooth
List Price: $36.60
Price: $29.95
Out of Stock

6200 sealed bearing

Details 

6200 sealed bearing for wheels of gas and electric scooters
List Price: $11.95
Price: $7.95

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »


Home - Products - Search - Checkout

© Copyright by ScootR 
Website Designed by Website Interactive