Scootr Scooters - Products
PHONE: 256-468-2761
Search Products
 

Home » Sonic Gas Scooter Parts

 
Crankshaft Seal L.H. Flywheel/Magneto side 12x32x7 p/n 700292

Details 

Crankshaft Seal 41.5cc L.H. Flywheel/Magneto side 12x32x7 p/n 700292
List Price: $8.98
Price: $8.49

Crankshaft Seal R.H. behind pullstart reciever 12x22x7 p/n 700291

Details 

Eton 41.5cc Crankseal Rightside behind pullstart reciever 12x22x7 p/n 700291
List Price: $8.98
Price: $8.49

Crankshaft Seals Set left and right side seals

Details 

Crankshaft Seals Set left and right side seals
List Price: $13.80
Price: $10.95

Cylinder Head Gasket e-ton 40 p/n 700122

Details 

Eton 41.5cc Cylinder Head Gasket p/n. 700122
List Price: $4.25
Price: $3.49

Engine Cover Black Plastic e-ton 40 p/n 700151

Details 

ETON 40/41.5cc plastic engine cover P/N 700151
List Price: $37.95
Price: $29.00

Engine Long Block only ETON IXL 40, RXL 40, 2.2H.P/41.5cc

Details 

Engine crankcase and crankshaft with cylinder head and piston and spark plug & exhaust studs or bolts & gasket & intake gasket only. does not include carburetor, starter recoil or catch/ratchet or clutch shoes or flywheel or ignition coils,engine covers, external engine parts sold separately.
List Price: $329.00
Price: $283.00

 

Details 

Eton 40 Coil Mount Bolt Set of two bolts with 7mm head for easy coil adjustment on Black Thunder Coils These are the OEM coil mount bolts used on the green coil from factory
List Price: $5.40
Price: $3.99

 

Details 

Eton 40 Ikeda Coil Harness This wiring harness replaces the trigger module when using the New Black Thunder coil, the wiring harness plugs onto the new ignition coil and then plugs right into the vehicle harness with two wires in a 3-pin plug. If you are purchasing the coil the coil will come with this wiring harness and an NGK spark plug so there would be no need to purchase this harness if you are purchasing the coil it is included.
List Price: $6.95
Price: $6.00

 

Details 

Eton 41.5cc 2.2hp Engine Rebuild Kit Comes with piston and rings and needle bearing and wrist pin and gclips and cylinder head/jug and cylinder gasket and crankshaft seals and and bearings and crankcase gasket and crankshaft and crank keyway and nuts and spark plug. basically it is all the parts that comprise the engine except for the two crankcase halves if you need crankcase halves order them separately
List Price: $276.00
Price: $216.00

 

Details 

H.P. ethanol compatible fuel lines for Cobra and Chuweng & many other mini scooters. provides and produces more pressure on fuel tank grommets helping to seal leaks & line i.d. is bigger on fuel supply so it assists in facilitating a higher fuel flow. purchase either with or without a replacement fuel filter or 17mm chuweng grommet and appropriate filter or Cobra 22mm grommet and filter we are now offering both style grommets! the ones that come in the top of the tank 15mm hole 17mm grommet and the ones that come in the back of tank 19mm hole 22mm grommet when ordering the fuel lines with grommet set up so we know which grommet to include. Select 15 mm or 19mm even if just ordering lines. By making size of grommet selection, that will let us know which size filter or grommet is needed if ordered/added
List Price: $17.50
Price: $12.00

 

Details 

Kenda 4.10/3.50-4 tire fits Front or Rear of R3 & xlt-pro gt & Star II or Front Rock or Cobra R1/R4 FRONT TIRE and can also be used on the rear of models with rear suspension 9 inch rear tire after changing to our 1 inch longer swingarms.
List Price: $26.60
Price: $23.95

kickstand for 41.5cc gas scooter

Details 

featured kickstand fits all 41.5cc can be custom installed to fit nuke, standR, lowrider, rocky and cobra extreme
List Price: $23.00
Price: $19.00
Out of Stock

« | 1 | 2 | 3 | 4 | »


Home - Products - Search - Checkout

© Copyright by ScootR 
Website Designed by Website Interactive