#77 Jet 40cc New Style ATV Float Carbs Only The factory jet in the New ATV style carburetor for 40cc E-ton Rascal & Viper Jr and some older Cobra & Chuweng scooters is #64 which is believed to be insufficient and lean which could create excessive heat and piston ring collapse or premature upper engine failure. Recommend is this number 77 jet to make sure there is plenty of fuel available and optimal running temperatures.

585-5M-15 Belt for use with 24 tooth clutch sprockets Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with a 24 tooth trans sprocket. Reccomend 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.

We are currently in search of a non riveted bonded band brake, we realize the above price is extortionate but know that the only way to get these brakes is by disassembling a new scooter. Hopefully in the future we will have better than OEM brakes at a more reasonable price

AIR BOX WITH CHOKE LEVER for scooter

Rascal Viper Air Filter Ring Gasket also for Generation 1 Cobra & Raser & The Rock scooters with float style carburator and frame mounted fuel pump.

Rascal Viper Air Filter Screws. also for Generation 1 Cobra & The Rock scooters with float style carburator and frame mounted fuel pump. $2.49 pair

Air Filter Element Only 4 ATV & float style carbs p/n 700136

Eton Factory Scooter Air-Filter for use with (TK) primer bulb style carburator that has red push button choke. This filter does not fit rascal 40 Also not for use with Walbro H.P. carbs

Scooter Air Intake Aluminum Velocity Stack For smooth air flow and mounting H.P. Air Filters

Air Filter H.P. Microsponge UNI 3 in Crush this filter & it springs back. No more crushed or bent filters w/UNI Velocity stack required for mounting

Air Filter K&N Brand 3inch.. Velocity stack required for mounting An excellent value. High Quality Long Lasting Air Filter. A local discount parts house Wants 36.99 for this filter. It is our pleasure to offer it at 29.90 Filter is rechargable with K&N clean And Recharge kit.

Air Filter With Velocity Stack & Clamp & Gasket for scooter select filter design/brand: Uni 3in, or 3in K&N w/ or w/o TGN prefilter