"Super Nuke" Gas Scooter a Nuke gas scooter... with the following modifications: 12/35 factory gear ratio or 12/40 or 12/45 chain drive to wheel already installed. racing engine flywheel. racing BLACK ignition coil. high performance fuel system/carburator and super nuke kickstand Allow 2-3 weeks for modification and delivery. absolutely no warranty whatsoever. sorry.

This is about wheel drive belts, chains and sprockets on dual belt or belt & chain models. The bigger the shaft sprocket, the more the torque or low end pulling power, while smaller provides more top speed. we offer 12 & 13 toothed hardened shaft sprockets. Wheel sprocket is the same principal. small=speed & large=torque/pull. Cobra & The Rock & Nuke are 20 tooth shaft/belt gear to 60 toothed wheel belt gear=ratio 1:3 which provides good speed on 9 inch tire. most other models are: 1:3.16 or 1:3.95 gear ratio which provides good torque. big wheel models are 1:5.1 select your factory or custom gear ratio by selecting 1 of 2 available #35 Chain Drive shaft/hub mount sprockets and many different wheel plate style sprockets. shaft sprockets have set screw, but must be welded to shaft after determining correct position & tracking. wheel sprockets are bolt on. call scooterman @ 256.468.2761 u.s.a. english for assistance in ordering custom chain drive.

#35Chain1/2Link

#35 ansi Chain 28 inch for Cobra, Cobra v2 & The Rock gas scooters with 12 tooth shaft sprocket and 35/36 tooth wheel sprocket. 36 outer links & 37 inner links plus master link. =74

32 inches of #35 ansi Chain 42 outer links 43 inner links & master link. For use with 40 tooth or smaller wheel sprockets only!

#35 Chain 35 inch W/master link For use with 45 tooth or smaller wheel sprockets only!

#35 Chain Drive Kit 12:36 #35 ansi roller chain kit for: The Rock, Cobra, Nuke, Lowrider Rock, STANDR, & ROCKETTE AND OTHER MODELS using 9 inch rear tire. Kit includes 3 feet of #35 ansi chain & master link, a 12 tooth #35 shaft sprocket and a 36 tooth #35 wheel sprocket. this is a factory gear ratio of 1:3

#35 Chain Drive Kit 12 : 40 #35 ansi roller chain kit for: The Rock & Cobra AND OTHER MODELS using 9 inch rear tire. Kit includes 3 feet of #35 ansi chain & master link, a 12 tooth #35 shaft sprocket and a 40 tooth #35 wheel sprocket. this is a gear ratio of 1:3.33

#35 Chain Drive Kit 12:45 #35 ansi roller chain kit for: The Raser FX, SCOOTR, TIGER, R3, R5 AND OTHER MODELS using 10 inch rear tire. Kit includes 3 feet of #35 ansi chain & master link, a 12 tooth #35 shaft sprocket and a 45 tooth #35 wheel sprocket. this is a gear ratio of 1:3.75

#35 Chain Master Link

#35 Chain Stainless Steel 1/2Link

#35 Chain Stainless Steel 35inch With Master Link