Scootr Scooters - Products
PHONE: 256-468-2761
Search Products
 

Home » THS 04 & THS 05 Big Wheel SCOOTER PARTS

 
Drive Shaft Left Sprocket 4mm "Keybar"

Details 

Drive Shaft Big Sprocket 4mm "Keybar" keeps lower left side bigger pulley from spinning on shaft
List Price: $4.00
Price: $3.00

 

Details 

Stainless Steel Driveshaft Nut
List Price: $2.95
Price: $2.25

Drive Shaft Spacer Type 1&2 for Lower Left 5m Belt Sprocket & shaft bearing

Details 

Drive Shaft Spacer Type 1 & 2 for Lower Left Shaft 5m Belt Sprocket. Fits Raser, THS, SCOOTR, Tiger, R3, Star II, Rockville, Salorr, THX PRO & Libra, Cobra, the rock, lowrider rock, STANDR,Cobra commuter, rockette, dynamite III, and nuke scooters with This spacer goes between lower left side pulley and left side drive shaft bearing to keep bearing from damaging shaft. This is an improved spacer that is made in usa. Specs:ID-480/1000ths, OD-750/1000ths, 720 thousandths long
List Price: $12.60
Price: $10.00

Drive Shaft Spacer Type 3 Custom For Lower Left 5m Belt Sprocket & shaft bearing

Details 

Drive Shaft Spacer Type 3 Custom For Lower Left 5m Belt Shaft Sprocket when using 2 left side shaft bearings only! Some models/frames only benefit from extra left side bearing when primary bearing fails or shaft is worn where bearing rides.most models can carry 2 left bearings. call if need be. Fits many scooters if driveshaft bearing dwell in frame is exact same size for entire bore & is for custom improved application or temp fix only! not stock! This spacer goes outside or between lower left side drive shaft bearings x 2! If between two left bearings on Cobra you may need a washer or change pulley to our solid metal lower left pulley. This is for custom application only. Call before ordering! This spacer is only used when installing 2 left side bearings for which some frames don't retain the 2nd left side bearing. Call and we will explain. (256)468-2761 This is an improved spacer that is made in usa. Specs:ID-480/1000ths, OD-750/1000ths, 340-350 thousandths long.
List Price: $13.00
Price: $9.99

Drive Shaft Spacer Type 4 Custom For Lower Left 5m Belt Shaft Sprocket when

Details 

Drive Shaft Spacer Type 4 Custom For Lower Left 5m Belt Shaft Sprocket when using 2 left side shaft bearings only! Some models/frames only benefit from extra left side bearing when primary bearing fails. most models can carry 2 left bearings. call if need be. Fits many scooters if driveshaft bearing dwellin frame is exact same size for entire bore & is for custom improved application only! not stock! This spacer goes between lower left side pulley and left side drive shaft bearings x 2! Or between two left bearings on Cobra. This is for custom application only. Call before ordering! This spacer is only used when installing 2 left side bearings for which some frames don't retain the 2nd left side bearing. Call and we will explain. 256.468.2761 This is an improved spacer that is made in usa. Specs:ID-480/1000ths, OD-750/1000ths, 400 thousandths long. use of type 3 spacer for this extra bearing setup is more common.
List Price: $13.00
Price: $10.00

Engine Cover Black Plastic e-ton 40 p/n 700151

Details 

ETON 40/41.5cc plastic engine cover P/N 700151
List Price: $37.95
Price: $29.00

Engine Lower End Rebuild Kit

Details 

1 x crankcase gasket 2 x crankshaft bearings 2 x crankshaft seals
List Price: $37.60
Price: $31.95

Engine Mount Set Of 2 for scooters

Details 

Eton 41.5cc Rubber Engine Mounts for scooters Set Of 2
List Price: $38.95
Price: $34.95

 

Details 

Eton 40 Ikeda Coil Harness This wiring harness replaces the trigger module when using the New Black Thunder coil, the wiring harness plugs onto the new ignition coil and then plugs right into the vehicle harness with two wires in a 3-pin plug. If you are purchasing the coil the coil will come with this wiring harness and an NGK spark plug so there would be no need to purchase this harness if you are purchasing the coil it is included.
List Price: $6.95
Price: $6.00

 

Details 

Eton 41.5cc 2.2hp Engine Rebuild Kit Comes with piston and rings and needle bearing and wrist pin and gclips and cylinder head/jug and cylinder gasket and crankshaft seals and and bearings and crankcase gasket and crankshaft and crank keyway and nuts and spark plug. basically it is all the parts that comprise the engine except for the two crankcase halves if you need crankcase halves order them separately
List Price: $276.00
Price: $216.00

Eton Engine Mount Plate for Scooter

Details 

Eton Engine Mount Plate Engine and muffler bolts to it. Repace broken plate to reduce noise and vibration and improve belt alignment. For scooter only
List Price: $25.90
Price: $23.00

Exhaust Gasket p/n 700146 For eton 41.5cc

Details 

Eton 41.5cc Exhaust Gasket p/n 700146 Replace this gasket every time exhaust is removed.
List Price: $5.35
Price: $4.00

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »


Home - Products - Search - Checkout

© Copyright by ScootR 
Website Designed by Website Interactive