tire drive belt for StandR scooter and Nuke scooter. 525-5m-15-belt This belt now superceeds to factory spec of 520-5m-17

560-5m-15 Belt For use as clutch belt when 575 clutch belt is still loose even with motor/engine adjusted all the way back. If motor mounts are weak and dry rotted, replace them first to eliminate that being the source of a belt tension and adjustment issue.

575-5m-15 CLUTCH BELT most common on e-ton powered scooters. 500 & 560 & 580 & 600 & 635 available

580-5M-15 Belt Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with 20 tooth trans sprocket to later find it became too long over time...unless your scooter has a 24 tooth trans sprocket. Reccomend superceding to 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.

585-5M-15 Belt for use with 24 tooth clutch sprockets Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with a 24 tooth trans sprocket. Reccomend 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.

60 Tooth Black Plastic Sprocket

60 Tooth Lower Left Shaft Plastic Sprocket With Steel Hub

Shaft Sprocket 5m chromed Alloy for Left side belt, lower pulley or driveshaft big alloy sprocket. 60 tooth

6200 sealed bearing for wheels of gas and electric scooters

Front brake for The Rock/Cobra & also Nuke/Lowrider Rock/StandR New Non-Riveted now Bonded 70mm Band Brake Replaces APSE 70 band break and Silent 70 band brake with a superior non riveted design. Don't be fooled by lower-priced Band Brakes. they might only last a couple weeks which is not safe

New Non-Riveted now Bonded 80mm Band Brake Replaces APSE 80 band brake and Silent 80 band brake with a superior non riveted design. New brake drum included Don't be fooled by lower-priced Band Brakes. they might only last a couple weeks which is not safe

New Non-Riveted now Bonded 88mm Band Brake APSE 88 The brakes are Chrome in outer shell color. The red brake photo is just for photo appeal. See image of our 80mm bonded band brake to see exactly what your 88mm band brakes will look like