585-5M-15 Belt for use with 24 tooth clutch sprockets Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with a 24 tooth trans sprocket. Reccomend 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.

60 Tooth Black Plastic Sprocket

60 Tooth Lower Left Shaft Plastic Sprocket With Steel Hub

Shaft Sprocket 5m chromed Alloy for Left side belt, lower pulley or driveshaft big alloy sprocket. 60 tooth

6200 sealed bearing for wheels of gas and electric scooters

Eton Factory Scooter Air-Filter for use with (TK) primer bulb style carburator that has red push button choke. This filter does not fit rascal 40 Also not for use with Walbro H.P. carbs

Scooter Air Intake Aluminum Velocity Stack For smooth air flow and mounting H.P. Air Filters

Air Filter H.P. Microsponge UNI 3 in Crush this filter & it springs back. No more crushed or bent filters w/UNI Velocity stack required for mounting

Air Filter K&N Brand 3inch.. Velocity stack required for mounting An excellent value. High Quality Long Lasting Air Filter. A local discount parts house Wants 36.99 for this filter. It is our pleasure to offer it at 29.90 Filter is rechargable with K&N clean And Recharge kit.

Air Filter With Velocity Stack & Clamp & Gasket for scooter select filter design/brand: Uni 3in, or 3in K&N w/ or w/o TGN prefilter

Air Intake Insulator/Manifold To Cylinder Head Gasket

Eton-IntakeManifold-W/2 Gaskets & 4 Bolts. For scooters only