575-5m-15 CLUTCH BELT most common on e-ton powered scooters. 500 & 560 & 580 & 600 & 635 available

580-5M-15 Belt Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with 20 tooth trans sprocket to later find it became too long over time...unless your scooter has a 24 tooth trans sprocket. Reccomend superceding to 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.

585-5M-15 Belt for use with 24 tooth clutch sprockets Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with a 24 tooth trans sprocket. Reccomend 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.

For use with 26 toothed transmission speed sprocket & factory belt For Dynamite III OR Gen 03 Rock or Rockette Clutch/Trans belt, non e-ton engines

X Caliber 250 or X Caliber 350 belt. Cobra 4 stroke Subaru clutch belt.

Speed Control Brand Made in U.S.A. This belt now supercedes to: Super duty 670-5M-16 belt. Cobra gas scooter Belt, The Rock tire belt Also fits Rockette gas scooter And Dynamite III gas scooter

Cobra gas scooter Belt, The Rock tire belt, 670-5m-16 Belt Also fits Rockette gas scooter And Dynamite III gas scooter.

Cobra gas scooter Belt, The Rock tire belt, 675-5m-15 Belt Also fits Rockette gas scooter And Dynamite III gas scooter This belt now supercedes to: Super duty 670-5M-16 belt.

This belt is for use with 22 tooth torque sprockets! for factory 20 tooth shaft sprockets on The Rock or Cobra and Commuter with factory swingarms use 670-5m-16

700-5M-15Belt For rock or cobra with ScootR Swingarms or with 24 tooth 5m torque sprockets, ************ALSO*********** If using 24Toothed torque sprocket And ScootR Swingarms on Cobra then use 740-5m-16

710-5m-15 Belt Superceeds to htd 710-5m-16 For Older model Cobra gas scooters Where wheel sprocket is not removable, rather it is part of the wheel. . . .OR. . . . For rock or cobra with ScootR Swingarms or with 26 tooth 5m torque sprockets, ************NOTE*********** "If using 26Toothed torque sprocket And ScootR Swingarms on Cobra, then use 740-5m-16 On geared & stretched Chuweng , use 790 or 800-5m-16"

740-5M-15 belt now supercedes to: 740-5M-16 belt, Chuweng Raser Gas scooter tire drive belt, THS, ROCKVILLE, Libra, Salorr, Chuweng, Star II, THX PRO & others. Can be used on Cobra & The Rock & Dynamite if factory belt gearing is kept and ScootR longer Swingarms are installed. This is factory belt for R1, R4 & R5/Raser FX