12:52 Chain Drive Big Wheel Speed Kit #35 Chain Drive Kit 12:52 Replaces: 1000-5M-15 belt 1000-5M-18 belt 1000-5M-20 belt #35 ansi roller chain kit for: Chuweng Raser big wheel with 145/70-6 size tires and 6 inch wheels. Also FITS Xcooter Thunder, Saloor Big Wheel, Sonic Big Wheel, THS Big Wheel, Desert Storm Big wheel, Steeple Big Wheel, PanthR Big Wheel, AND OTHER MODELS using 145/70-6 rear tire. Kit includes #35 ansi chain & master link (This chain is 128 pins including master link) a 12 tooth #35 shaft sprocket and a 52 tooth #35 wheel sprocket, one 1/8 roll pin and one 1/8 inch drill bit. This 12:52 kit is a gear ratio of 1:4.3 The factory sprocket on the shaft is 20 tooth and the factory wheel sprocket is a 102 tooth 5m belt drive. The factory gearing is 1:5.1 This chain drive set is 1:4.3 For factory chain drive gear ratio of 1:5 see our 12:60 Chain drive kit for big wheel scooters. This 52 tooth sprocket is the same as oem sprocket for "The Rocky" but the shaft sprocket is totally different so this is not for "Cobra Extreme" or "The Rocky"

12:60 Chain Drive for Big Wheel OEM gear ratio Kit #35 Chain Drive Kit 12:60 Replaces: 1000-5M-15 belt 1000-5M-18 belt 1000-5M-20 belt #35 ansi roller chain kit for: Chuweng Raser big wheel with 145/70-6 size tires and 6 inch wheels. Also FITS Xcooter Thunder, Saloor Big Wheel, Sonic Big Wheel, THS Big Wheel, Desert Storm Big wheel, Steeple Big Wheel, PanthR Big Wheel, AND OTHER MODELS using 145/70-6 rear tire. Kit includes #35 ansi chain & master link (This chain is 128 pins including master link) a 12 tooth #35 shaft sprocket and a 60 tooth #35 wheel sprocket, one 1/8 roll pin and one 1/8 inch drill bit.The factory sprocket on the shaft is 20 tooth 5m and the factory wheel sprocket is a 102 tooth 5m belt drive sprocket. The factory gearing is 1:5.1 This 12:60 chain drive kit is 1:5 ratio For top speed chain drive kit on a "Big Wheel Scooter" see our 12:52 kit which is a gear ratio of 1:4.3 and a Chain drive kit for big wheel scooters only, see exclusion below. This 52 tooth sprocket is the same as oem sprocket for "The Rocky" but the shaft sprocket is totally different so this is not for "Cobra Extreme" or "The Rocky"

260 X 85 Inner Tube

Fits Front or Rear of R3 & xlt-pro gt & Star II or Front Rock or Cobra R1/R4 FRONT TIRE and can also be used on the rear of models with rear suspension 9 inch rear tire after changing to our 1in longer swingarms. 260 x 85 Tire/3.0-4 Knobby tire is discontinued and replaced by Kenda 4.10/3.50-4 tire with K304A tread pattern

3.0-4 Inner Tube

3.0-4.0 Tire By Kenda Dual Terrain 154-95 Cobra gas scooter factory front tire. Great for all of our gas scooters as front tire providing smoothe handling and steering except will not fit Nuke, or Lowrider or Standr due to frame clearance.

3.0-4.0Tire By Kenda Street Gripper P/n 154-104

3.0-4.0 Tire By Kenda Super Smoothe street slick Xtr 154-89

585-5M-15 Belt for use with 24 tooth clutch sprockets Some Chuweng Raser or xcooter thunder THS Big Wheel scooters used this belt from factory with a 24 tooth trans sprocket. Reccomend 585-5m-15 belt if you are using a 24 tooth engine/trans 5m belt sprocket. The most common belt used for the left side or clutch belt with a 20 tooth engine sprocket and a 60 tooth shaft sprocket is a 575-5m-15. replacement of dry rotted twisted mis-shapen motor mounts can cause belt tension & alignment issues and incorrect length choice or misdiagnosis. your motor can be adjusted forward and backwards slightly to help with belt tension. we recommend replacing the motor mounts if the motor mounts are dry rotted or they stay twisted with the transmission belt removed.

60 Tooth Black Plastic Sprocket

6200 sealed bearing for wheels of gas and electric scooters

New Non-Riveted now Bonded 80mm Band Brake Replaces APSE 80 band brake and Silent 80 band brake with a superior non riveted design. New brake drum included Don't be fooled by lower-priced Band Brakes. they might only last a couple weeks which is not safe