Crankshaft Seal 41.5cc L.H. Flywheel/Magneto side 12x32x7 p/n 700292

Eton 41.5cc Crankseal Rightside behind pullstart reciever 12x22x7 p/n 700291

Crankshaft Seals Set left and right side seals

Eton 41.5cc Cylinder Head Gasket p/n. 700122

ETON 40/41.5cc plastic engine cover P/N 700151

Engine crankcase and crankshaft with cylinder head and piston and spark plug & exhaust studs or bolts & gasket & intake gasket only. does not include carburetor, starter recoil or catch/ratchet or clutch shoes or flywheel or ignition coils,engine covers, external engine parts sold separately.

Eton 40 Coil Mount Bolt Set of two bolts with 7mm head for easy coil adjustment on Black Thunder Coils These are the OEM coil mount bolts used on the green coil from factory

Eton 40 Ikeda Coil Harness This wiring harness replaces the trigger module when using the New Black Thunder coil, the wiring harness plugs onto the new ignition coil and then plugs right into the vehicle harness with two wires in a 3-pin plug. If you are purchasing the coil the coil will come with this wiring harness and an NGK spark plug so there would be no need to purchase this harness if you are purchasing the coil it is included.

Eton 41.5cc 2.2hp Engine Rebuild Kit Comes with piston and rings and needle bearing and wrist pin and gclips and cylinder head/jug and cylinder gasket and crankshaft seals and and bearings and crankcase gasket and crankshaft and crank keyway and nuts and spark plug. basically it is all the parts that comprise the engine except for the two crankcase halves if you need crankcase halves order them separately

H.P. ethanol compatible fuel lines for Cobra and Chuweng & many other mini scooters. provides and produces more pressure on fuel tank grommets helping to seal leaks & line i.d. is bigger on fuel supply so it assists in facilitating a higher fuel flow. purchase either with or without a replacement fuel filter or 17mm chuweng grommet and appropriate filter or Cobra 22mm grommet and filter we are now offering both style grommets! the ones that come in the top of the tank 15mm hole 17mm grommet and the ones that come in the back of tank 19mm hole 22mm grommet when ordering the fuel lines with grommet set up so we know which grommet to include. Select 15 mm or 19mm even if just ordering lines. By making size of grommet selection, that will let us know which size filter or grommet is needed if ordered/added

Kenda 4.10/3.50-4 tire fits Front or Rear of R3 & xlt-pro gt & Star II or Front Rock or Cobra R1/R4 FRONT TIRE and can also be used on the rear of models with rear suspension 9 inch rear tire after changing to our 1 inch longer swingarms.

featured kickstand fits all 41.5cc can be custom installed to fit nuke, standR, lowrider, rocky and cobra extreme